banner
Home / Products / Gas Boiler
Products
Szs Hot Selling Double Drum Water Tube Boiler Stainless Steel Steam Boiler Oil Boiler Machine for Industrial Machine

Szs Hot Selling Double Drum Water Tube Boiler Stainless Steel Steam Boiler Oil Boiler Machine for Industrial Machine

Main Features SZS series boiler is designed with longitudinal double drums and " D " type chamber structure. Furnace is
Basic Info
Model NO. SZS10-1.25-Y. Q SZS15-1.25-Y. Q SZS20-1.25-Y. Q
Function Steam Boilers, Oil Boiler
Fuel Gas-Fired
Installation Packaged Boiler
Structure Fire Tube
Media Steam and Water
Water Circulation Forced Circulation
Drum Placement Horizontal Boiler
Pressure Pressure
Manufacturing Level A
Burning Style Chamber Combustion Boiler
Usage Industrial, Home, Vehicle, Power Station
Transport Package Naked with Plastic Film
Trademark REACH BOILER
Origin China Henan
HS Code 8402190000
Production Capacity 5000ton/Year
Product Description
Main Features
SZS series boiler is designed with longitudinal double drums and " D " type chamber structure. Furnace is placed on the right and convection tube bank is on the left, super heater is arranged at convection tube bank. The body is fixed on the basement by middle and both end flexible supports and make the boiler expand horizontally sideways. Around the furnace is membrane water cooling tube wall. Furnace and tube bank are totally separated by the membrane water tube cooling wall at the left side of the furnace. The back part of bundle is sparse shift structure, front part is aligned structure. Smoke from furnace outlet enters re-burning chamber, convection tube bank area and then from left front part enters spiral fine coil economizer and condenser, and finally is discharged to atmosphere through chimney.

Model:SZS Type Gas/Oil Fired Steam Boiler
Structure:WaterTube Three Pass
Rated Steam Capacity:10-50 ton/hr

Rated Steam Pressure:1.25/1.6/2.5 Mpa

Rated Steam Temperature:194/205/220C

Application:Textile Mill,Food and Beverage,Chemical,Medicine,Light Industry,Rubber,Printing and Dyeing Plant,Paper Mill,Wood Processing,Garment and Laundry etc.

Szs Hot Selling Double Drum Water Tube Boiler Stainless Steel Steam Boiler Oil Boiler Machine for Industrial Machine

Model No.

SZS10-1.25-Y/QSZS10-1.6-Y/QSZS10-2.5-Y/QSZS15-1.25-Y/QSZS15-1.6-Y/QSZS15-2.5-Y/QSZS20-1.25-Y/QSZS20-1.6-Y/QSZS20-2.5-Y/QSZS25-1.25-Y/QSZS25-1.6-Y/QSZS25-2.5-Y/QSZS30-1.25-Y/QSZS30-1.6-Y/QSZS30-2.5-Y/QSZS35-1.25-Y/QSZS35-1.6-Y/QSZS35-2.5-Y/QSZS40-1.25-Y/QSZS40-1.6-Y/QSZS40-2.5-Y/Q

Rated Evaporation(T/h)

10

15

20

25

30

3540

Rated Pressure(Mpa)

1.25/1.6/2.51.25/1.6/2.51.25/1.6/2.51.25/1.6/2.51.25/1.6/2.51.25/1.6/2.51.25/1.6/2.5

Rated Steam Temp. (ºC)

194/205/220194/205/220194/205/220194/205/220194/205/220194/205/220194/205/220

Efficiency

>98%>98%>98%>98%>98%>98%>98%

Diesel Consumption(Kg/h)

583

868

1148

1439

1739

20302318

Natural Gas(Nm³/h)

704

1045

1383

1739

2090

24502787

Weight (T)

31

41

49

53

65

7281

Overall dimensions(L*W*D(mm))

7050*3350*3400

8700*3350*3400

9400*3600*3600

11000*3600*380011000*3800*400012000*4000*420012400*4400*4600

Szs Hot Selling Double Drum Water Tube Boiler Stainless Steel Steam Boiler Oil Boiler Machine for Industrial Machine


Szs Hot Selling Double Drum Water Tube Boiler Stainless Steel Steam Boiler Oil Boiler Machine for Industrial Machine

Szs Hot Selling Double Drum Water Tube Boiler Stainless Steel Steam Boiler Oil Boiler Machine for Industrial Machine

Szs Hot Selling Double Drum Water Tube Boiler Stainless Steel Steam Boiler Oil Boiler Machine for Industrial Machine

Technical Advantages
SafetyBoiler body uses the forced circulation in the high temperature area to make sure all heating areas can be cooled down and avoid vaporization; The explosion door and flame detector are equipped for safe and reliable operation. Comb plates are used between both sides of boiler and tube bundle to avoid leakage of condensate and gas caused by using refractory concrete as sealing material. Air proof test is done before delivery in the factory to guarantee any gas leakage problem.
Environmental protectionBig combustion chamber equipped with Low emission combustion burner effectively reduce the NOx to 30mg/m3. Smoke duct and smoke outlet use internal insulation to reduce operating noise.Combustion chamber uses full membrane water cooling wall structure and pressurized combustion without smoke mixture.Energy conservationGood quality alumina silicate fiber and fire clay insulation material are used and the boiler body temperature is controlled below 45ºC and greatly heat loss is reduced. Combustion chamber is designed with narrow distance tube membrane water cooling wall which has good air proof to reduce heat lost and increase boiler thermal efficiency. Internal inspection holes uses high-alumina refractory and manhole cover seal devices, solving superheat problem in this part caused by using refractory bricks.ConvenienceManholes are placed on the front and back side of drums and inspection doors on back side of boiler easy to open for inspection and clean inner and outer parts.Longer lifespanMembrane structure are used in the front and back wall for boiler body and highly increased their lifespan to over 20 years.The key processes including material cutting, rolling, drilling are done by advanced CNC machining process to reduce the assembly stress and extend boiler service lifetime.Flutter prevention fastener is used for high temperature part convection tubes, which avoid convection tube cracking problem.Longitudinal and girth joint adopt advanced automatic submerged-arc welding for good welding quality. All longitudinal and girth joint will be tested by radiographic inspection. Henan Reach Special Equipment is located in the central city of Zhengzhou, Henan Province, China. Our company is a professional trade supplier of industrial equipment such as boilers, with 12 production companies with various qualifications and over 30 employees. Mainly engaged in the design and sales of oil and gas steam boilers, coal/biomass steam boilers, oil and gas thermal oil boilers, coal/biomass thermal oil boilers, electric heating steam boilers, oil and gas hot water boilers, and medium and high temperature hot air furnaces. The manufacturers our company collaborates with are all legitimate production enterprises with A-level and B-level qualifications for Chinese boiler manufacturing. They have various certifications both domestically and internationally, including CE certification, ASME certification, etc., which can fully meet the matching requirements for boilers in various production environments in different countries. The factories our company collaborates with are all based on the manufacturing and production of various pressure vessels such as steam boilers, thermal oil boilers, and autoclaves. We have established an industrial system that integrates product development, engineering project design, equipment manufacturing, engineering installation, system debugging, pre-sales, sales, and after-sales services. Our company's products are not only sold and widely praised in the domestic market of China, but also exported to more than 60 countries and regions such as South Korea, Vietnam, Myanmar, Mongolia, the Philippines, and Indonesia, receiving recognition and pursuit from customers. I believe that our company can bring objective benefits to customers with advanced technology, excellent equipment, excellent products, and exquisite services. We look forward to long-term friendly cooperation with friends from various countries! Welcome to our store! Q1: What about after sales service, such as installation and commissioning?Answer:(1)English manual, drawings are supplied with boiler. (2)Engineers are able to instruct installing and commissioning abroad.Q2: What are the main products?Answer:(1)Oil fired steam boiler, capacity from 0.1t-20t (2) Gas fired steam boiler, capacity from 0.1-20t (3) Electric steam generator, capacity from 36kw-28800kwQ3: How to insure your product quality?Answer:(1)Strength calculation report with applied materials information; (2)100%NDT(non-destructive inspection) report of steel plate, tube and welding rod; (3)100% X-ray inspection(welding seam): ensure the quality of entire boiler; (4)Hydrostatic test: ensure the standard working pressure and safety; (5)Third-party inspection report; (6)Passed ISO, ASME certifications